All guides
- Install on macOS
- Install on Windows
- Install on Linux
- Getting started
- Your first scene
- Chat, overlays and alerts
- Going live
- Streaming to Velora with VELoQ
- Recording and the replay buffer
- Transitions and studio mode
- Screenshots
- Automations and hotkeys
- Themes and Theme Studio
- Stream Deck, Touch Portal and Companion
- Face tracking with Velum Avatars
- Updates
- Velum Gauges
- Games and what you need
- Forza Horizon 4, 5 and 6
- Forza Motorsport
- F1 23, F1 24 and F1 25
- American Truck Simulator and Euro Truck Simulator 2
- X-Plane 11 and 12
- Microsoft Flight Simulator 2020 and 2024
- Two PCs: gaming and streaming
- When Velum Gauges hears nothing
Guides › Velum Gauges
X-Plane 11 and 12
Velum finds X-Plane on your network and asks it for your aircraft's data. Nothing to type in the sim.
X-Plane 11 and 12 can share your aircraft's data over your network. With Velum Gauges there's nothing to type in X-Plane: Velum finds the sim and asks it for what it needs. It works with X-Plane on Windows, Mac or Linux, on the same computer as Velum or another one.
Set it up
- X-Plane 12: open Settings › Network and turn on Accept incoming connections. X-Plane 11 needs nothing.
- In Velum, add a Gauge layer (how) and set Pack to Flying.
- Press Set up a game… and pick X-Plane 11 / 12.
- With X-Plane running, press Find X-Plane. Velum listens for the sim on your network for up to 10 seconds, then asks it for your aircraft's data. The X-Plane line says what it found.
- Start a flight. X-Plane shows up under Recent senders.
If Find X-Plane doesn't find it
Type the sim computer's address under X-Plane's address and press Ask this X-Plane. If X-Plane is on this same computer, that's 127.0.0.1. Add :port only if you've changed X-Plane's own port from 49000.
This is also the way to go on Windows when X-Plane is on another computer and Find X-Plane hears nothing: the firewall permission Velum Gauges adds covers its listening port, not the announcement X-Plane makes to find it.
The other way: X-Plane's Data Output
If you already send X-Plane's Data Output somewhere, Velum can read that too. In X-Plane, open Settings › Data Output, tick Network via UDP for these rows, and send them to this computer's address and port 5310:
- 3 (speeds), 4 (Mach, vertical speed, G-load), 13 (flaps), 14 (gear)
- 17 (pitch, roll, headings), 20 (latitude, longitude, altitude)
Good to know
- The firewall: when Windows asks whether X-Plane may use the network, allow it. On the computer running Velum, if it's Windows and X-Plane is on another computer, let games through once (how).
- Both styles work: Glass Flight and the Flight strip.
- Moments: touchdown with your landing rate, gear down and up, and stall.
- X-Plane versions differ a little. If your version doesn't share one of the numbers, that part of the gauge just stays empty.
Nothing showing up? See When Velum Gauges hears nothing.
New and still growing: tell us what you find in the Velum Studio Testers Discord.
